Bobcat 325 M1606 Error Code

M1606 Fault Code Meaning :

Traction Lock Hold Solenoid Short To Ground

Traction Lock Hold Solenoid Short To Earth

Traction Lock Hold Solenoid Short to Ground

Hydraulic Bypass Short to Ground

M1606 Error Code

Hydraulic Bypass Short to Ground is the main cause of M1606 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.

Tip For 325 Model

When an engine is running in an enclosed area, fresh air must be added to avoid concentration of exhaust fumes. If the engine is stationary, vent the exhaust outside. Exhaust fumes contain odorless, invisible gases which can kill without warning.

Do not engage the starter for longer than 15 seconds at a time. Longer use can damage the starter by overheating. Allow starter to cool for one minute before using starter again.